• Product Description

    The all new 9083P multi function tester has been designed to fully comply with the latest testing requirements. It also incorporates many of the features that you have requested. It is a hand held unit which enables rapid and easy range setting and testing.

    The unique RCD-LOC feature allows loop testing without tripping any type of RCBD. The 9083P meets all the safety and performance requirements of BS EN 61557

    Features

    Continuity test – with auto null facility to zero out lead resistance

    RCD testing – Trip time, trip current, auto test and ramp current

    Prospective short circuit current – direct readout of PSCC

    Insulation measurement – with 100, 250 and 500 V test voltages

    Loop Impedance – Unique loop test principle will not trip any RCD

    RCD auto test – test RCDs in auto mode without going back to the tester

    Integrated socket polarity test

    Fully protected – against damage when accidentally connected across phases

    Item Specification

    Display 3½ digit LCD 1999 digits
    Insulation resistance 0.05 – 2000 MΩ
    Test voltage at 1mA 100, 250,500 V
    Continuity 0.05 – 199 Ω
    Loop Impedance 0.01 – 2000 Ω
    PSCC 0 – 26 kA
    RCD nominal test currents 10, 30, 100, 300, 500 mA, ½ x 30 mA, 5 x 30 mA
    Trip time 0 – 500 ms
    Tripping current with ramp test ½ rated current to 1.1 rated current
    Voltage 0 – 440 V
    Frequency 45 – 65 Hz
    Safety standards EN61010, BS EN 61557 BS 7671
    Over voltage category CAT III 300 V
    Power supply 6 x 1.5 V AA batteries
    Dimensions 260 x 105 x 55 mm
    Weight 950 g

    Additional Details

    Type Multifunctional Testers