• Product Description

    The Beha-Amprobe ProInstall-75-UK, with new advanced features, is the perfect installation testing tool for verifying the safety of electrical installations in domestic, commercial, and industrial applications.

    Ensure that fixed wiring is correctly installed and compliant with IEC 60364, HD 384 requirements and BS7671 17th Edition wiring regulation meeting local requirements. The ProInstall-75-UK is efficient to use by allowing the user to measure loop impedance without tripping RCDs, eliminating the need to

    bypass them. Slim reach probes allow you to keep your eyes on the panel while probing hard to reach areas. With easy-to-operate controls, a large display with a wide viewing angle, padded neck strap, and a compact, ergonomic design, this tester is comfortable enough to use for all day testing.


    Voltage & Frequency

    Wiring polarity checker

    Insulation Resistance

    Continuity & Resistance

    Loop & Line Resistance

    Prospective Earth Fault Current (PEFC/IK)

    Prospective Short-Circuit current (PSC/IK)

    RCD switching time

    RCD tripping level ramp test

    RCD variable current

    Automatic RCD test sequence

    Test pulse current sensitive RCDs (Type A)

    Phase Sequence Indicator

    Other Features


    Illuminated Display

    What is included:

    Test lead set

    ProInstall-TL-UK LC38 AMP-MFT, mains test cord

    Alligator clips

    Test probe

    ProInstall-TL-KIT Remote test probe and probe tips

    ProInstall-CC Soft case with carrying strap

    Carry strap for neck/waist

    TL-75 Fused test probe, red/blue/green with lantern spring, cap and tip cover


    Statement of calibration


    Manual/quick reference guide

    Item Specification

    Size 10 cm (L) x 25 cm (W) x 12.5 cm (H)
    Weight (with batteries) 1.3 kg
    Battery Type AA, 6 ea., Alkaline supplied. Usable with 1.2 V NiCd or NiMH batteries (not supplied)
    Battery life (typical) 200 hours idling
    Fuse T3.15 A, 500 V, 1.5 kA 6.3 x 32 mm (PN 2030852)
    Operating Temperature -10 °C to 40 °C
    Storage Temperature -10 °C to 60 °C indefinitely (to -40 °C for 100 hrs)
    Relative Humidity Noncondensing 80 % 10 to 35 °C; 70 % 35 to 40 °C
    Operating Altitude 0 to 2000 meters
    Shock, Vibration Vibration to Class 3 per Mil-Prf-28800F 1 meter drop test, six sides, oak floor
    Sealing IP 40
    EMC Complies with EN61326-1: 2006
    Safety Complies with EN61010-1 Ed 2.0 (2001-02), UL61010, ANSI/ ISA  -s82.02.01 2000 and CAN/CSA c22.2 No.1010 2nd edition Overvoltage
    Category III (CAT III), 600 V Measurement Category III is for measurements performed in the building installation. CAT IV, 300V.
    Maximum voltage between any terminal and earth ground 500 V
    Surge Protection 6 kV peak per EN 61010-1 Ed. 2.0 (2001-02)

    Additional Details

    Type Multifunctional Testers