• Product Description

    The C.A 5003 is a very competitively-priced analogue multimeter designed to meet all the needs of electricians.

    The accuracy of the Chauvin Arnoux CA5003 Multimeter is 1.5% as standard with all of the parameters and tests that can be taken using the device, and offers an average impedance of 20kΩ/V. This analogue multimeter can be used with DC voltage when it is between 100mV and 1000V (8 cal.) with a DC intensity of 50µA to 15A (7 cal.). And one of the best features is how it can also be used with AC voltage between 100V and 1000V (5 cal.) with an intensity of 1.5mA to 15A (5 cal.).

    Features

    Automatic calibration

    “Voltest” LED if voltage present in ohmmeter mode

    dB scale (AC voltages)

    Fuse status LED

    Dimensions: 160 x 105 x 56 mm

    Weight: 500 g

    IP53

    Use on any installation rated lower than or equal to CAT III 600 V as per IEC/EN 61010-1 Edition 2

    Item Specification

    DC voltage 8 ranges: 100 mV /../ 1,000 V
    AC voltage 5 ranges: 10 V /../ 1,000 V
    Internal resistance 20 kΩ/V
    Working frequency 10 Hz ...100 kHz depending on range
    DC current 7 ranges: 50 µA /../ 15 A
    AC current 4 ranges: 5 ranges: 1.5 mA /../ 15 A
    Resistance 2 ranges: 10 kΩ and 1 MΩ
    Audible continuity test R < 50 Ω
    Scale in dB for V AC 0 ... +22 dB
    Typical accuracy 1.5 % on V • 2.5 % on V~ and A • 10 % on Ω
    Power supply 9 V battery
    Battery life 10,000 measurements of 10 s
    Electrical safety IEC / EN 61010-1 Edition 2 • 600 V Cat III-2
    Protection HRC fuses: 1.6 A and 16 A
    Degree of watertightness IP 53
    Environmental conditions -10 °C ... +55 °C and RH < 90 %
    Dimensions / Weight 160 x 105 x 56 mm / 500 g

    Additional Details

    Type Multimeter