£999.00 (£1,198.80 inc VAT)
The C.A 6417 is ideal for quick earth-loop resistance measurements, displaying earth voltage with a dangerous voltage alarm whilst providing additional safety.
Earth clamps unlike any others...
The C.A 6417 earth clamps, delivered in a carrying case, are ideal for quick earth-loop resistance measurements. 600V CAT IV, they display the earth voltage with a dangerous voltage alarm and provide additional safety during measurement.
They are particularly easy to use thanks to ergonomic innovations such as a force compensation system to keep the clamp open without any effort and an OLED display, offering visibility over an angle of 180° whatever the lighting conditions.
The automatic PRE-HOLD function when the clamp is opened and the automatic jaw calibration function at power-up help to optimize processing of the measurements provided by the clamps.
On the same screen, they offer simultaneous display of:
- the impedance and leakage current (Ω+A),
- the earth voltage,
- the breakdown of the resistive and inductive parts of the ground impedance,
They also allow users to display the impedance transposed to a frequency close to the network frequency, thus reducing measurement errors when low values are involved.
Equipped with Bluetooth communication, the C.A 6417 clamp can be used with the GTC and/or DATAVIEW® PC software to view the values in real time, recover the measurements and create standard or customized measurement reports. There is also an ANDROID application for tablets & smartphones for viewing real-time graphs, GPS geolocation of the measurements and email distribution of the measurements with graphs, comments and photos.
Please press the link below for demonstration video
Large measurement range: 1,500 Ω / 500 µH / 40A
Alarms on Ω, A and V
Automatic Pre-Hold mode when the clamp is opened
2,000 storage locations
Real-time clock for time/date-stamping of measurements
Automatic calibration of jaw opening distance at start-up
Buzzer and automatic power-off
Bluetooth communication interface
GTC data transfer software
Loop ohmmeter 1,500-count display, Loop inductance measurement, Ground voltage and Ammeter 4,000-count display are detailed on the specification sheet provided.
What Is Included:
1 clamp delivered in a carrying case with
4 x 1.5 V batteries, 1 CD-Rom containing
the operating manual in 5 languages and
the software with a simplified GTT driver
Frequencies Measurement frequency 2,083 Hz / Transposition frequency 50, 60, 128 or 2,083 Hz Modes Standard or advanced Alarms Configurable on Z, V and A Buzzer Active HOLD Manual or automatic PRE-HOLD Automatic power-off Active / Inactive Display 152-segment OLED. Active area 48 x 39 mm Max. clamping diameter Ø 35 mm Storage 2,000 time/date-stamped measurements Communication Bluetooth class 2 Power supply 4 x 1.5 V LR6 (AA) alkaline batteries or 4 x NiMH batteries Battery life 1,440 measurements of 30 seconds each Calibration Automatic at start-up Electrical safety IEC 61010 600 V CAT IV Protection IP40 Dimensions 55 x 95 x 262 mm Weight Approx. 935 g with batteries Type Single Function Testers