Results 1 - 12 ( of 93 )
  • The CalCard (Cal Card) is a resistance checkbox used to verify the correct readings on an Insulation and Continuity ohm meter.

    £30.00 (£36.00 inc VAT)
  • The FLUKE-1653B is the ideal tester for professional trouble-shooters. This is the instrument that is indeed ideal for professional users due to its additional functionality.

    £614.95 (£737.94 inc VAT)
  • Before doing any electrical work it is essential to be absolutely certain the circuit is dead. The Martindale VI13800 is a GS38 compliant voltage indicator which rapidly and safely checks for AC and DC voltages from 50V to 600V. The bright, long life neon indicators give clear and immediate display of the voltage level range.

    £44.00 (£52.80 inc VAT)
  • Nothing is more dangerous than trusting a defective voltage indicator to test for a dead circuit. Safe electrical work requires the use of a voltage indicator that has been proved with a proving device before and after use.
    The Martindale VIPD contains the VI13800 voltage indicator and the PD440 proving device, enabling you to comply with health and safety recommendations for safe working.

    £124.00 (£148.80 inc VAT)
  • The SOK 36 is used to check that the internal wiring of sockets is all correct, and when used it can be used to check true earth loop, polarity and to test residual current devices (RCDs).

    £64.95 (£77.94 inc VAT)
  • Take out the guesswork, the Socket & See SOK34 is the simple solution for mains wiring testing. The first socket tester to show where the actual fault is, live, earth or neutral and also test true loop impedance. New patent 'fault locate'electronics gives clearest indication yet of good plus 17 wiring fault conditions - more than any other known socket tester.

    £44.95 (£53.94 inc VAT)
  • The Socket & See PDL234 is a 4 in 1 digital Tester - loop, mains voltage, correct wiring, correct polarity and is used by over 8000 British Gas Service Engineers.

    £139.95 (£167.94 inc VAT)
  • The FLUKE-1AC-II is the next generation VoltAlert AC non-contact voltage testers from Fluke are easy to use. Just touch the tip to a terminal strip, outlet, or supply cord. When the tip glows red and the unit beeps, you know there's voltage present.

    £23.00 (£27.60 inc VAT)
  • The SEAWARD PowerCheck 1557 is the only comprehensive PAT and Installation instrument verification system in one rugged, drop-proof enclosure.

    £315.00 (£378.00 inc VAT)
  • Both the features and the design of the Socket & See VIP150 Craftsman Voltage Tester are what causes it to raise the bar way above the other voltage tester devices on the market. And as soon as you open the box you will be able to see the difference. It is obvious that it has been designed and constructed with the everyday electrician in mind, as the functions that it can perform will make every worker’s life easier and their jobs more efficient.

    £15.95 (£19.14 inc VAT)
  • The Socket&See PDIT 360 is a simple and rugged instrument for use by electrical installers in testing the continuity of electric cables as well as their insulation resistance. The tester is only for use on dead circuits and although fully protected against accidental connection to a live circuit, it always pays to to check that the circuit is dead before working on it.

    £15.95 (£19.14 inc VAT)
  • The easy way to find fuses and circuit breakers with the Socket & See FFCB1140UK.
    In operation, as the fuse finder detects the correct fuse or breaker, the indicator lights climb the bar graph. This is accompanied by an increase in the frequency of a sound pulse and two indicators to ensure easy, correct fuse finding.

    £99.95 (£119.94 inc VAT)
Results 1 - 12 ( of 93 )