£2,495.00 (£2,994.00 inc VAT)
Ease of use, massive memory, the quick report facility sets this instrument above the competition.
Ease of use, massive memory, the quick report facility sets this instrument above the competition. Also there are two analogue input channels, you can monitor any variable for instance watch the change in electrical energy as inside and outside temperature changes - how cool is that!
Data logging, harmonics, waveform and events (transients, dips, swells and interupts) measured all in one go.
Massive memory enables you to conduct extended surveys without worry of running out of storage
Quick report facility allows you to download and produce a report in 2 minutes and put a cost to energy used
EN 50160 automatic report - again within moments a 17 page report compares the measured data with the supply standard highlighting any errors
Intuitive user interface means that you will soon be up and running and remember the setting up procedure
Kit comprises everything you need to get you going
Remote monitoring on PC and Android devices via Bluetooth.
With four current channels* and 3 voltage channels built-in, the Kewtech 6315 captures and records power, harmonic, waveform and power quality events from multiple sources simultaneously.
By using the Kewtech 6315's advanced measurement and capturing capabilities it's easy to verify exactly where energy is loss and make improvements to the power quality of an installation. It's even extremely simple to set up, with dedicated quick start guide, wiring check and sensor detection for easy and reliable measurements at all times.
This power analyser is capable of tracking and storing data on practically every type of electrical and power factor. It can perform voltage, current, frequency, active power, reactive power, apparent power, active energy, reactive energy, apparent energy, power factor (cos), neutral current, demand, harmonics, quality (swell/dip/interruption, transient/overvoltage, inrush current, unbalance rate) capacitance calculation for PF correction unit and flicker procedures.
These measurement are recorded in realtime on the included 2GB SD card. Data can then be easily transferred to PC using the card, a USB cable or it is possible to view data back wirelessly via Bluetooth using a compatible Android device and the KEW smart 6315 app (available on the Google Play Store).
High acuuray meaurements +/- 0.2% Volts/Current, 0.3% Energy
Quick set up guide - on screen guides and wiring check
Quick report enbales fast download to report, extracting the salient data immediately. You can enter daytime and night time tariffs to get the cost of the electricity used. You can even look at a subset of the data i.e. just Monday working hours.
Extremely compact design
Simultaneous measurements of means that you do not have to do several surveyson the same site
Demand monitor / prediction
Wave form and vector diagrams
Harmonic measurements and analyser
Displays and calculates power factor and corrective capacitors
Includes three 1000A flexi-clamps acurate down to 1A
Print screen function saves any screen, including connection diagram – for fast report writing
Fourth current channel for measured neutral current (neutral current also calculated) or earth leakage
Test leads colour coded to current British Standard.
Comprehensive user friendly intuitive software
Internal memory plus flash card memory – up to 1GB!
Digital output for use to control max demand
Two additional inputs for external sensors. For instance to monitor lighting / temperature levels
Complies fully to IEC61010-1 Cat IV 300V
What is included:
Three (KEW8130) 1000A flexi-clamps
Four voltage test leads
Type Power Quality Analysers