£88.00 (£105.60 inc VAT)
Lets you identify which fuse / MCB controls which circuit, a 'self learning' mode enables accurate location of fuse.
A Two piece kit and comes with a mains lead for socket outlets. ACC016E test leads are optional for testing lighting circuits.
Self learning module increases accuracy as you sweep over the breakers.
Kewtech's Fuse Finder is a safe, effective method of identifying the location of a fuse and defining which fuse/MCB controls a particular circuit.
This comprehensive fuse finding kit includes a transmitter, receiver and mains lead, making it suitable for use in a wide variety of different applications.
The included transmitter connects directly to the circuit which will be traced by using either the mains lead or fused test lead set. Fully powered from the supply with no batteries required, the transmitter will then inject a signal into the circuit which can be picked up by the receiver at the fuse board.
The receiver automatically auto-tunes itself when scanning a bank of fuses and MCBs. At least two scans are required in order for the receiver to adjust its sensitivity to detect the strongest signal and determine the correct fuse for the circuit under test.
To make it easy to find the source of the signal, the receiver uses LED light indicators which clearly show rising signal strength.
The Kewtech Fuse Finder consists of a transmitter and receiver with mains lead.
Transmitter – connects to the circuit to be traced by either the mains lead or fused test lead set.
The transmitter is powered from the supply so does not need batteries. It injects a signal into the circuit that is then picked up by the receiver at the fuse board.
Receiver – this cleverly auto-tunes when scanning a bank of fuses / mcbs. At least two scans are required so that the receiver can adjust its sensitivity to detect the strongest signal and hence the correct fuse for the circuit under test.
LEDs clearly indicate signal strength and an auto power off maximises battery life.
Standard Standard IEC 61010 250V CAT III, Double insulated Transmitter supply 110V / 230V 50-60Hz Transmitter current <20mA Receiver Batteries 2 x AA Alkaline Type Cable Locator & Fuse Finders