• Product Description

    The HPAT500 HandyPAT is an easy to use hand held PAT tester with simple one-button test selection. The tester comes with rechargeable batteries and mains charger for low cost of ownership and can even be used whilst recharging ensuring no downtime. Its lightweight portable design makes it ideal for testing in all locations whether under a desk or testing a wall mounted monitor.

    A single button press activates either a full Class I, Class II or lead test without any further interaction required by the user, unless a failure is encountered. The display has clear PASS / FAIL indicators and shows all test results on screen. Simple connection diagrams are permanently shown on the case body making it easy to start testing straight away.

    HPAT500/2 delivery contents include an extension lead adaptor, an earth bond probe with clip, a mains charger, 6xAA rechargeable batteries and a “Test & Go” carry case with separate pocket for accessories.

    A comprehensive range of optional adaptor leads are available enabling 110V appliance testing and testing of equipment terminated with 3 phase plugs.

    The HPAT500/2 has a new high contrast backlit display.


    Compact design with backlit display

    Easy one button testing

    Automatic Class I, Class II & power lead tests

    Measured values with clear PASS/FAIL indication

    200mA earth bond test – I.T. Safe

    250V / 500V insulation test

    Mains rechargeable

    What Is Included:

    TC57 carry case

    PSUHPAT230 mains charger

    Rechargeable batteries

    EX332 IEC lead

    TL67 earth bond probe


    Item Specification

    Earth continuity Test current: 200mA DC
     Range: 0-19.99Ω
     Resolution: 0.01Ω
     Accuracy: ± (5% rdg + 2 dgt)
     Fixed pass limits: ≤ 0.10Ω/≤ 0.20Ω
    Insulation  Test Voltage: 250V/500V DC selectable
     Test current: 1.5mA
     Ranges: 2.00MΩ, 20.0MΩ, 200MΩ
     Resolution: 0.01MΩ
     Accuracy: <100MΩ ± (5% rdg + 2 dgt), >100MΩ ± (10% rdg + 2 dgt)
    Default pass level  Lead: ≥ 1.0 MΩ
     Class I: ≥ 1.0 MΩ
     Class II: ≥ 2.0 MΩ
    Fuse test  Voltage: 4V DC (open circuit)
     Current: 200mA DC (short circuit)
     Pass level: >2mA
    Overload protection 300V AC/DC
    Complies with BS EN 61010
    Temperature range -10 to 40°C
    Supply 6 x 1.2V AA NiMH rechargeable batteries 1800mAh
    Dimensions 90 x 210 x 54mm
    Weight 700g (inc batteries & leads)

    Additional Details

    Type PAT Tester