• Product Description

    Designed for active testing of EVSE charging stations without opening the box!

    • Simulates Electric Vehicle connected to Chargepoint –

    activates power output

    • Permits Full Electrical Test including Visual Function;

    Insulation; Voltage & Frequency; Earth Loop Impedance;

    PFC; RCD and RCM

    • Works with all Metrel Multifunction Installation Testers

    • Especially suitable for use with Metrel MI3125BT;

    MI3102BT; MI3152; MI3155

    • Options for charging state output:

    A. Disconnected

    B. Charge Ready

    C. Active Charging (without ventilation)

    D. Active Charging (with ventilation)

    E. Pilot (CP) Error

    • Connect direct to Chargepoint, or

    include charging cables, plugs

    and sockets in test path

    Features

    Banana socket outputs for connection to a 3-phase installation tester.

    Voltage indicators on EVSE output.

    Proximity Pilot resistance selector for simulation of EV cable presence and current rating detection.

    Control Pilot resistance selector for simulation of electric vehicle status.

    Socket output for connection to a 1-phase installation tester (Phase 1, Neutral, PE).

    Type 2 Male Plug connector for connection to EVSE.

    6 mA EV RCD support.

    Functional tests support*.

    EVSE AUTO SEQUENCE® support*.

    MESM report creation**.

    Basic support:

    A 1532

    Partial support:

    6 mA EV RCD

    EVSE report**

    Full support:

    Functional test support

    EVSE AUTO SEQUENCE® support

    What Is Included:

    Instrument EVSE adapter

    Small soft carrying bag

    Instruction manual

    Item Specification

    Dimensions (w x h x l) 200 x 100 x 70 mm
    Mass (without accessories) 0.82 kg
    Input voltage 400 V (3-phase)
    Frequency 50 Hz
    Test current 13 A
    Proximity Pilot (PP) simulation Open circuit
    13
    20 A
    32 A
    63 A
    Control Pilot (CP) simulation State A (not connected)
    State B (connected, not charging)
    State C (charging without ventilation)
    State D (charging with ventilation)
    State E (error - CP short to PE via diode)
    Overvoltage category 300 V CAT II
    Protection degree IP 40
    Pollution degree 2
    Protection classification Double insulation
    Altitude 3000 m above sea level
    Test lead length 0.5 m
    Weight 0.82 kg
    Working temperature range 0 °C … 40 °C @ 95 % RH, non-condensing
    Storage temperature range -10 °C … +70 °C
    Maximum storage relative humidity 90 % RH (-10 °C … +40 °C)
    80 % RH (40 °C … 60 °C)

    Additional Details

    Type Socket Adaptors & Testers