£238.00 (£285.60 inc VAT)
ISOPK2 kits incorporate CombiVolt™ 2 pole voltage testers, PU260 and lockout kits.
Di-Log Test Equipment is delighted to offer to you the ISOPK1 & ISOPK2 Kits incorporating the award winning CombiVolt™ 2 pole voltage testers, the fully conformant PU260 and our all new Locko kits.
The PU260 is the first, 2 pole 690V voltage tester proving unit, with a built in continuity checker for lead sets and a touch electrode for checking fused leads. The unit will also indicate if you 2 pole voltage tester draws in excess of 3.5mA current, thus not conforming to the “Protection Against Electric Shock” and BS EN 61243-3 2010.
Kit is compliant to BS EN 61243-3-2010 and Amendment 3
ISOPK1 kit comes supplied with the DLLOC1 Personal Lockout Kit
ISOPK2 Kit comes supplied with the DLLOC2 Domestic Lockout Kit
Necessary to fully comply with the HSE – Guidance Note GS38
Up to 690V test for 2 pole testers
LED indication when tester draws over 3.5mA current
Continuity Check for leads
Touch Electrode for checking fused leads
Optical and acoustic continuity indication
Low battery indication
Auto power up
DL6790 CombiVolt™ 2 Voltage/Continuity Tester Voltage display 12 – 690 V AC/DC LED resolution 12, 24 , 50, 120, 230, 400, 690 LCD resolution 1 V +/- 3 % + 8 digits Voltage detection Automatic Acoustic signal AC voltage – DC voltage Polarity detection Full range Response time LED < 0.1s, LCD <2s Frequency range 0 – 400 Hz Peak current Is < 0.3 A / Is (after 5s) < 3.5 mA Operation time 30s Recovery time 10 min Auto power on < 12 V AC/DC Single pole voltage indication Voltage range 100 – 690 V AC Frequency range 50 – 400 Hz Continuity Measuring range 0 – 400 KΩ Phase rotation test Voltage range 100 – 690 V Frequency 45 – 65 Hz Over voltage protection 690 V AC/DC g Power supply 2 x 1.5 V LR03 batteries Dimensions 255 x 70 x 28 mm Weight 200 g PU260 Proving Unit Voltage range 50 – 500 V AC/DC Power supply 9 V 6LF22 Dimensions 150 x 80 x 50 mm Weight 310 g Type Multifunctional Testers